ZyXEL PLA-402 Bedienungsanleitung PDF herunterladen (Seite 32)

Chapter 4 LEDs and Troubleshooting

PLA-400/402 Series User’s Guide

4.2 Power and LED Problems

V The PLA-400/402 does not turn on. None of the LEDs turn on.

1 Make sure you are using the power adaptor included with the PLA-400/402.

2 Make sure the power adaptor is connected to the PLA-400/402 and plugged in to an

appropriate power source. Make sure the power source is turned on.

3 Disconnect and re-connect the power adaptor to the PLA-400/402.

4 If the problem continues, contact the vendor.

V The ETHN LED does not turn on.

1 Check the hardware connections. See the Quick Start Guide.

2 Inspect your cables for damage. Contact the vendor to replace any damaged cables.

3 Check the Ethernet adapter on your computer and make sure it’s enabled and working

properly.

4 If the ZyXEL Device is connected to an Ethernet switch or router, make sure the device

is working correctly, and that the LAN network is working and configured correctly as

well.

V The LINK LED does not turn on.

1 Use the PLA-4xx Series Configuration Utility to detect all other HomePlug devices on

your power line network. Make sure that the network password is the same on all of your

power line adapters.

2 Try plugging a second HomePlug AV adapter into an adjacent outlet (to your PLA-400/

402) and see if the LINK LED lights up.

4.3 Configuration Utility

V The PLA-4xx Series Configuration Utility displays an error during installation.

• Make sure your computer is using Windows XP operating system. At the time of writing,

this is the only compatible operating system for the configuration utility.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 59 60

Keine Kommentare

ZyXEL PLA-402 Bedienungsanleitung Seite 32