ZyXEL omni.net LCD+M Bedienungsanleitung PDF herunterladen (Seite 165)

Technical Reference for ZyXEL omni.net series

B-13

All the Following Commands Require a 'AT' Prefix

S Com. bit dec hex Function and description +Def./Ref.

S84= bit dec hex

0-2 Embedded Protocol Analyzer control.

CCn

0 1 1 Capture DTE-DCE interface protocol information.

1 2 2 Capture B-channel (X.75 or V.120) frames.

2 4 4 Capture D-channel protocol information.

3 0 0 (*) Display S register value in decimal format.

8 8 Display S register value in hex format.

4 0 (*) 0 Indicate Caller ID after the 1st RING message.

16 10 Disable Caller ID indication.

5 0 0 POTS port 1 has higher priority for answering an analog call. &L0

32 20 POTS port 2 has higher priority for answering an analog call. &L1

S85= bit dec hex

0 0 0 Call Bumping function disabled. CE0

1 1 (*) Call Bumping function enabled. CE1

1-6 0 (*) Add-persist time interval.

KAxn

7 0 0 (*) S85b1-6 is in Second unit.

KASn

128 80 S85b1-6 is in Minute unit.

KAMn

S87= bit dec hex

0 0 (*) 0 Enable POTS port 1 to receive global calls.

1 1 Disable POTS port 1 to receive global calls.

1 0 (*) 0 Enable POTS port 2 to receive global calls.

2 2 Disable POTS port 2 to receive global calls.

2 0 (*) 0 CHAP/PAP for authentication conversion.

4 4 PAP only for authentication conversion.

4 0 (*) 0 Result code 46 for X7 is CONNECT 112K/..

Result code 47 for X7 is CONNECT 128K/..

16 10 Result code 46 for X7 is CONNECT 112000/..

Result code 47 for X7 is CONNECT 128000/..

5-6 0 (*) 0 Bundle connection is disabled.

&Jn

1 2 ... 160 161 162 163 164 165 166 167 168 169 170 ... 185 186

Keine Kommentare

ZyXEL omni.net LCD+M Bedienungsanleitung Seite 165