ZyXEL P-870HW-I Bedienungsanleitung PDF herunterladen (Seite 201)

P-870HW-I1 User’s Guide

Chapter 15 Bandwidth MGMT 201

See Appendix I on page 431 for examples of services. The following table describes the labels

in this screen.

Table 90 Management > Bandwidth MGMT > Configuration

LABEL DESCRIPTION

Active Select this to enable bandwidth management.

LAN BW

Budget(kbps)

Enter the amount of bandwidth for this interface that you want to allocate using

bandwidth management.

It is recommended to set this speed to match what the LAN port’s connection can

handle. For example, set it to 100000 kbps if your Ethernet network has a maximum

speed of 100000 kbps.

You can set this number higher than the interface’s actual transmission speed. This will

stop lower priority traffic from being sent if higher priority traffic uses all of the actual

bandwidth.

You can also set this number lower than the interface’s actual transmission speed.

However, this will cause the ZyXEL Device to not use some of the interface’s available

bandwidth.

WLAN BW

Budget(kbps)

Enter the amount of bandwidth for this interface that you want to allocate using

bandwidth management.

It is recommended to set this speed to match the maximum speed of the wireless

network. In most cases, set it to 54000 kbps, unless your wireless network cannot

handle this speed.

You can set this number higher than the interface’s actual transmission speed. This will

stop lower priority traffic from being sent if higher priority traffic uses all of the actual

bandwidth.

You can also set this number lower than the interface’s actual transmission speed.

However, this will cause the ZyXEL Device to not use some of the interface’s available

bandwidth.

WAN BW

Budget(kbps)

Enter the amount of bandwidth for this interface that you want to allocate using

bandwidth management.

It is recommended to set this speed to match what the WAN port’s connection can

handle. For example, set it to 40000 kbps if your broadband modem or router has a

maximum speed of 40000 kbps.

You can set this number higher than the interface’s actual transmission speed. This will

stop lower priority traffic from being sent if higher priority traffic uses all of the actual

bandwidth.

You can also set this number lower than the interface’s actual transmission speed.

However, this will cause the ZyXEL Device to not use some of the interface’s available

bandwidth.

# This field is a sequential value.

Direction Select LAN to apply bandwidth management to traffic that the ZyXEL Device forwards

to the LAN.

Select WAN to apply bandwidth management to traffic that the ZyXEL Device forwards

to the WAN.

Select WLAN to apply bandwidth management to traffic that the ZyXEL Device

forwards to the WLAN.

Name This field displays the name of the rule. You can change it. Enter a descriptive name of

up to 20 alphanumeric characters, including spaces.

Service This field displays one of the ZyXEL Device’s predefined applications, or it displays

User defined. If you want to change it to User defined, you may need to use the Edit

Bandwidth Management Rule screen to set up detailed settings.

Dest Port Enter the port number of the destination.A blank destination IP address means any

destination IP address.

1 2 ... 196 197 198 199 200 201 202 203 204 205 206 ... 437 438

Kommentare zu diesen Handbüchern

Keine Kommentare

ZyXEL P-870HW-I Bedienungsanleitung Seite 201

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung ZyXEL P-870HW-I