P-971M User’s Guide
55 Chapter 6 Command Examples
6.1.5 save
Syntax:
save
This command saves the current configuration. The following figure shows an example.
Figure 20 save Command Example
CM> save
Instance: BFC System (0x80ffba50)
Section 1 Non-Vol Settings successfully written to the device.
Section 2 Non-Vol Settings successfully written to the device.
CM>
6.1.6 logout
Syntax:
logout
This command exits from the CLI.
6.2 CM Command Examples
This section shows some CM command examples.
6.2.1 load_config
Syntax:
load_config <IpAddress> <Filename {127}>
This command gets a text based configuration from a TFTP server. After the upload process is
complete, the device executes the commands line by line.
The following example gets a configuration file (config.txt) from the TFTP server
(
192.168.100.100).
Kommentare zu diesen Handbüchern