ZyXEL Communications Network Router ZLD Bedienungsanleitung PDF herunterladen (Seite 329)

100

101

ZyWALL (ZLD) CLI Reference Guide 329

CHAPTER 42

Session Timeout

Use these commands to modify and display the session timeout values. You must use the

configure terminal command before you can use these commands.

The following example sets the UDP session connect timeout to 10 seconds, the UDP deliver session

timeout to 15 seconds, and the ICMP timeout to 15 seconds.

Table 199 Session Timeout Commands

COMMAND DESCRIPTION

session timeout {udp-connect <1..300> | udp-deliver

<1..300> | icmp <1..300>}

Sets the timeout for UDP sessions to connect or deliver

and for ICMP sessions.

session timeout session {tcp-established | tcp-synrecv

| tcp-close | tcp-finwait | tcp-synsent | tcp-

closewait | tcp-lastack | tcp-timewait} <1..300>

Sets the timeout for TCP sessions in the ESTABLISHED,

SYN_RECV, FIN_WAIT, SYN_SENT, CLOSE_WAIT,

LAST_ACK, or TIME_WAIT state.

show session timeout {icmp | tcp-timewait | udp} Displays ICMP, TCP, and UDP session timeouts.

Router(config)# session timeout udp-connect 10

Router(config)# session timeout udp-deliver 15

Router(config)# session timeout icmp 15

Router(config)# show session timeout udp

UDP session connect timeout: 10 seconds

UDP session deliver timeout: 15 seconds

Router(config)# show session timeout icmp

ICMP session timeout: 15 seconds

1 2 ... 324 325 326 327 328 329 330 331 332 333 334 ... 385 386

Kommentare zu diesen Handbüchern

Keine Kommentare

ZyXEL Communications Network Router ZLD Bedienungsanleitung Seite 329

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software ZyXEL Communications Network Router ZLD