ZyXEL N300 Bedienungsanleitung PDF herunterladen (Seite 27)

Chapter 5 Tutorials

WRE2205 User’s Guide

2 Make sure that you have installed the wireless client (this example uses the NWD210N) driver and

utility in your notebook.

3 In the wireless client utility, find the WPS settings. Enable WPS and press the WPS button (Start or

WPS button)

4 Log into WRE2205’s Web Configurator and navigate to the Network > Wireless LAN > WPS

Station screen.

5 In the WRE2205’s Web Configurator, select Registrar in Config Mode and then press Start PBC.

Note: Your WRE2205 has a WPS button, as well as a Start PBC button in the Web

Configurator. Both buttons have exactly the same function; you can use one or the

other.

Note: It doesn’t matter whether you press the button on the WRE2205 or the wireless

client first. WPS times out after two minutes of pressing a button. Press the button

on the second device within about a minute of the first, then wait two minutes for

the WPS configuration to complete.

The WRE2205 sends the proper configuration settings to the wireless client. Then the wireless client

is able to communicate with the WRE2205 securely.

The following figure shows an example of how to set up wireless network and security by pressing a

button on both WRE2205 and wireless client (the NWD210N in this example).

Figure 16 Example WPS Process: PBC Method

Wireless Client

WRE2205

SECURITY INFO

COMMUNICATION

WITHIN 1 MINUTE

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 66 67

Keine Kommentare

ZyXEL N300 Bedienungsanleitung Seite 27