ZyXEL P-971M Bedienungsanleitung PDF herunterladen (Seite 26)

P-971M User’s Guide

25 Chapter 2 Connection Screen.

Figure 5 Connection Status Screen

2.1.1 Acquire Downstream Channel

The P-971M must lock on to a cable operator’s offered channel to operate successfully. After

downloading the configuration file and checking its contents, your cable modem will attempt

to lock on to the offered channel. If successful, your cable modem has Locked on to the

channel; otherwise it is In Progress.

2.1.2 Connectivity State

The connectivity state is the current status of the connection between the cable modem and

your cable operator. During the initial negotiation with your cable operator’s CMTS, the P-

971M must establish a clear upstream and downstream channel, which it accomplishes in a

series of well defined steps. If the configuration file download, installation, DHCP, timer

settings, and communication channel negotiation succeeded, your cable modem is OK and

Operational; otherwise it is In Progress and one of the seven messages described in the

paragraphs below.

You will see Not Synchronized if the P-971M did not detect synchronization for QAM signal

timing, synchronization for FEC framing, synchronization for MPEG packets, or recognize

synchronization of downstream channel MAC address.

You will see Upstream Parameters Acquired if the P-971M is waiting for an upstream

channel message from your cable operator’s CMTS.

You will see Ranging Complete if the P-971M has successfully adjusted local channel

parameters (downstream power/frequency, upstream power/frequency, channel ID) and all

values are within specified ranges.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 85 86

Keine Kommentare

ZyXEL P-971M Bedienungsanleitung Seite 26