ZyXEL ADSL2+4 Bedienungsanleitung PDF herunterladen (Seite 204)

Chapter 22 Product Specifications

P-660H-T1v3s User’s Guide

204

22.2 Firmware Specifications

The following table summarizes the P-660H-T1v3s’s firmware features.

Table 62 Firmware Specifications

Default IP Address 192.168.1.1

Default Subnet Mask 255.255.255.0 (24 bits)

Default Admin

Password

1234

Static DHCP

Addresses

Static Routes 16

Device Management Use the web configurator to easily configure the rich range of

features on the P-660H-T1v3s.

Firmware Upgrade Download new firmware (when available) from the ZyXEL web site

and use the web configurator, an FTP or a TFTP tool to put it on

the P-660H-T1v3s.

Note: Only upload firmware for your specific model!

Configuration Backup

& Restoration

Make a copy of the P-660H-T1v3s’s configuration. You can put it

back on the P-660H-T1v3s later if you decide to revert back to an

earlier configuration.

Network Address

Translation (NAT)

Each computer on your network must have its own unique IP

address. Use NAT to convert your public IP address(es) to multiple

private IP addresses for the computers on your network.

Port Forwarding If you have a server (mail or web server for example) on your

network, you can use this feature to let people access it from the

Internet.

DHCP (Dynamic Host

Configuration

Protocol)

Use this feature to have the P-660H-T1v3s assign IP addresses, an

IP default gateway and DNS servers to computers on your

network. Your device can also act as a surrogate DHCP server

(DHCP Relay) where it relays IP address assignment from the

actual real DHCP server to the clients.

Dynamic DNS

Support

With Dynamic DNS (Domain Name System) support, you can use

a fixed URL, www.zyxel.com for example, with a dynamic IP

address. You must register for this service with a Dynamic DNS

service provider.

IP Multicast IP multicast is used to send traffic to a specific group of

computers. The P-660H-T1v3s supports versions 1 and 2 of IGMP

(Internet Group Management Protocol) used to join multicast

groups (see RFC 2236).

Time and Date Get the current time and date from an external server when you

turn on your P-660H-T1v3s. You can also set the time manually.

These dates and times are then used in logs.

Logs Use logs for troubleshooting. You can send logs from the P-660H-

T1v3s to an external syslog server.

Universal Plug and

Play (UPnP)

A UPnP-enabled device can dynamically join a network, obtain an

IP address and convey its capabilities to other devices on the

network.

1 2 ... 199 200 201 202 203 204 205 206 207 208 209 ... 271 272

Kommentare zu diesen Handbüchern

Keine Kommentare

ZyXEL ADSL2+4 Bedienungsanleitung Seite 204

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Router ZyXEL ADSL2+4