ZyXEL Communications Network Router NOT AVAILABLE Bedienungsanleitung PDF herunterladen (Seite 191)

Chapter 28 AAA Server

NXC CLI Reference Guide

191

[no] aaa group server radius

group-name

Sets a descriptive name for the RADIUS server group.

The

no command deletes the specified server group.

aaa group server radius rename

{group-name-old} group-name-new

Changes the descriptive name for a RADIUS server

group.

aaa group server radius group-name Enter the sub-command mode.

[no] server description

description

Sets the descriptive information for the RADIUS server

group. You can use up to 60 printable ASCII

characters. The

no command clears the setting.

[no] server group-attribute

<1-255>

Sets the value of an attribute that the NXC is used to

determine to which group a user belongs.

This attribute’s value is called a group identifier. You

can add ext-group-user user objects to identify

groups based on different group identifier values.

For example, you could configure attributes 1,10 and

100 and create a ext-group-user user object for each

of them. The

no command clears the setting.

[no] server host

radius_server auth-port port

Enter the IP address (in dotted decimal notation) or

domain name and authentication port of a RADIUS

server to add to this server group. The no command

clears this setting.

[no] server key secret Sets a password (up to 15 alphanumeric characters)

as the key to be shared between the RADIUS

server(s) and the NXC. The

no command clears this

setting.

[no] server timeout time Sets the search timeout period (in seconds). Enter a

number between 1 and 300. The

no command clears

this setting and set this to the default setting of 5

seconds.

[no] server acct-address

radius_server acct-port port

Enter the IP address (in dotted decimal notation) or

domain name and authentication port of the RADIUS

accounting server to add to this server group. The no

command clears this setting.

[no] server acct-secret key Enter the key (up to 15 alphanumeric characters) to

share between the external accounting server and the

NXC. The key is not sent over the network. This key

must be the same on the external accounting server

and the NXC. The

no command clears this setting.

[no] server acct-interim-

interval <1..1440>

Specifies the interval (in minutes) at which the NXC

sends subscriber status updates to the RADIUS

server. The no command clears this setting.

[no] server acct-retry-count

<retry_times>

Sets the number of times the NXC reattempts to use

the primary RADIUS server before attempting to use

the secondary RADIUS server. This also sets how

many times the NXC attempts to use the secondary

RADIUS server. The

no command clears this setting.

[no] server nas-id

<nas_identifier>

Specifies the Network Access Server identifier attribute

value if the RADIUS server requires it. The no

command clears this setting.

Table 112 aaa group server radius Commands (continued)

COMMAND DESCRIPTION

1 2 ... 186 187 188 189 190 191 192 193 194 195 196 ... 299 300

ZyXEL Communications Network Router NOT AVAILABLE Bedienungsanleitung Seite 191

Kommentare zu diesen Handbüchern

ZyXEL Communications Network Router NOT AVAILABLE Bedienungsanleitung Seite 191

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software ZyXEL Communications Network Router NOT AVAILABLE