ZyXEL N300 Bedienungsanleitung PDF herunterladen (Seite 44)

Chapter 6 Wireless LAN

WRE2205 User’s Guide

Figure 32 Network > Wireless LAN > WPS

The following table describes the labels in this screen.

6.9 WPS Station Screen

Use this screen when you want to add a wireless station using WPS.

Note: WPS can only be configured between two devices at a time. For example if devices

A and B are first configured using WPS, then use either A or B to configure device C

using WPS.

To open this screen, click Network > Wireless LAN > WPS Station tab.

Table 16 Network > Wireless LAN > WPS

LABEL DESCRIPTION

WPS Setup

Enable WPS Select this to enable the WPS feature.

PIN Number This displays a PIN number last time system generated. Click Generate to generate a

new PIN number.

WPS Status

Status This displays Configured when the WRE2205 has connected to a wireless network using

WPS or when Enable WPS is selected and wireless or wireless security settings have

been changed. The current wireless and wireless security settings also appear in the

screen.

This displays Unconfigured if WPS is disabled and there are no wireless or wireless

security changes on the WRE2205 or you click Release_Configuration to remove the

configured wireless and wireless security settings.

Release

Configuration

This button is only available when the WPS status displays Configured.

Click this button to remove all configured wireless and wireless security settings for WPS

connections on the WRE2205.

Apply Click Apply to save your changes back to the WRE2205.

Refresh Click Refresh to get this screen information afresh.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 66 67

Keine Kommentare

ZyXEL N300 Bedienungsanleitung Seite 44