ZyXEL P-2302R Bedienungsanleitung PDF herunterladen (Seite 310)

P-2302R Series User’s Guide

309 Chapter 33 Firmware and Configuration File Maintenance

33.3 Restore Configuration

This section shows you how to restore a previously saved configuration. Note that this

function erases the current configuration before restoring a previous back up configuration;

please do not attempt to restore unless you have a backup configuration file stored on disk.

FTP is the preferred method for restoring your current computer configuration to your Prestige

since FTP is faster. Please note that you must wait for the system to automatically restart after

the file transfer is complete.

Note: WARNING! Do not interrupt the file transfer process as this may

PERMANENTLY DAMAGE YOUR Prestige.

33.3.1 Restore Using FTP

For details about backup using (T)FTP please refer to earlier sections on FTP and TFTP file

upload in this chapter

Figure 176 Telnet into Menu 24.6.

1 Launch the FTP client on your computer.

2 Enter “open”, followed by a space and the IP address of your Prestige.

3 Press [ENTER] when prompted for a username.

4 Enter your password as requested (the default is “1234”).

5 Enter “bin” to set transfer mode to binary.

6 Find the “rom” file (on your computer) that you want to restore to your Prestige.

Menu 24.6 -- System Maintenance - Restore Configuration

To transfer the firmware and configuration file to your workstation, follow

the procedure below:

1. Launch the FTP client on your workstation.

2. Type "open" and the IP address of your Prestige. Then type "root" and

SMT password as requested.

3. Type "put backupfilename rom-0" where backupfilename is the name of

your backup configuration file on your workstation and rom-0 is the

remote file name on the Prestige. This restores the configuration to

your Prestige.

4. The system reboots automatically after a successful file transfer

For details on FTP commands, please consult the documentation of your FTP

client program. For details on backup using TFTP (note that you must remain

in this menu to back up using TFTP), please see your Prestige manual.

Press ENTER to Exit:

1 2 ... 305 306 307 308 309 310 311 312 313 314 315 ... 383 384

Keine Kommentare

ZyXEL P-2302R Bedienungsanleitung Seite 310